SW 304
DOMESTIC + COMMERCIAL
Midtherm SW 304 product has an easy to assemble socket and spigot joint which can be secured by an optional locking band.
Applications include: boiler (open flued and room sealed), natural and fanned draught (when silicone sealed); Gas fire, radiant / convector, ILFE or DFE; Air heater, SE-duct.
304 Stainless Steel.
Push fit, single wall, stainless steel flue system for use on gas and oil applications with a maximum normal operating temperature of 250 deg C.
- Available in sizes from 100 to 610 mm
- Stocked in sizes from 100 to 300 mm
- Maximum operating temperature 250 deg C
- Standard finish is: Stainless finish
- 1 year manufacturer’s warranty for all products installed and maintained in accordance with the installation and usage notes.
- All products can be powder coated to any BS or RAL colour code
Push fit socket and spigot type joint. Locking bands are available if required.
Product Code: 01
Description: 304 Stainless Steel
Material: 0.5mm 304 (EN 1.4301)
All flue system installations, i.e. oil, gas, solid and multi fuel, should be carried out by a suitably qualified installer or Building Control Department permission must be granted.
For detailed installation guidelines please refer to:
- The relevant Technical Information and Installation Instructions
- Building Regulations
- Planning Office
- Appliance Manufacturers Operating and Maintenance Instructions
- Relevant British Standards
Product Certification
Certificate Name | Number | Issued By |
|---|---|---|
EC Certificate of Factory Production Control | 2797-CPR-597284 | BSI |